Start with what the ENA set includes
The ENA: Dream BBQ Door 1 Vinyl Soundtrack is a 2LP set with 30 tracks from Oliver Buckland, METAROOM, Ippei Torii, Vasili Igor, and John Fraser. It comes in gatefold packaging illustrated by Nina Matsumoto, with additional art by AsliaTVT. Each copy includes a Bonus Dratula sticker, and purchases at Fangamer receive a code to unlock three joelgc.com Avatar skins based on the outfits ENA, Taski Maiden, and Coral Glasses wear in Nina Matsumoto's cover art.
Because the set has two records and a printed gatefold sleeve, your care routine should cover both the vinyl and the packaging. The steps below focus on handling, cleaning, storage, and turntable setup. They do not require special products beyond basic record-care supplies.
Catalog details that affect care
- ENA: Dream BBQ: Door 1 Vinyl Soundtrack: 2LP set with 30 tracks across two records. Two records means twice the handling and storage; keep each LP in its own inner sleeve and return it after play.

ENA: Dream BBQ: Door 1 Vinyl Soundtrack - ENA: Dream BBQ: Door 1 Vinyl Soundtrack: Gatefold packaging illustrated by Nina Matsumoto with additional art by AsliaTVT. The gatefold is printed artwork, so keep it dry and avoid stacking heavy items on it.
- ENA: Dream BBQ: Door 1 Vinyl Soundtrack: Includes a Bonus Dratula sticker. Store the sticker flat and away from heat if you plan to keep it; once applied, it is no longer removable.
How to clean your ENA vinyl records
Clean records before and after each play to remove dust and fingerprints. The steps below use common supplies: a carbon-fiber brush, a microfiber cloth, and a record-cleaning solution if you prefer a wet clean.
- Prepare a clean surface: Work on a flat, stable table with the record out of its sleeve. Keep the area free of food, drinks, and loose dust.
- Brush dry dust first: Hold a carbon-fiber brush so the bristles touch the grooves. Rotate the record with the brush stationary for a few turns, then lift the brush away.
- Use a microfiber cloth for fingerprints: Wipe gently in a circular motion following the grooves. Do not scrub across the grooves.
- Wet clean only when needed: If the record still looks or sounds dirty, apply a small amount of record-cleaning solution to a microfiber cloth, wipe along the grooves, and let the record air-dry before playing.
- Let the record dry completely: Never place a wet record back in its sleeve. Moisture can damage the sleeve and attract dust.
Handling the gatefold sleeve and sticker
The gatefold sleeve is part of the package, not just a cover. Open it flat on a clean surface when removing records, and close it before storing. Keep the printed surfaces away from direct sunlight and moisture to slow fading and warping.
The Bonus Dratula sticker is best kept on its backing paper until you decide where it goes. If you apply it to a laptop, case, or water bottle, clean and dry the surface first. Once stuck, it may not come off cleanly.
Storing vinyl soundtracks without damage
Store the ENA 2LP set upright, like a book, rather than stacked flat. Use the original inner sleeves or replace them with anti-static sleeves if you have them. Keep the set in a cool, dry place away from radiators, windows, and damp basements.
- Keep records vertical: Leaning records can warp over time. A shelf with dividers works well.
- Separate the records from the gatefold: If the gatefold is tight, store each LP in its own inner sleeve outside the gatefold to avoid seam splits.
- Control temperature and humidity: Avoid attics and garages with extreme swings. A stable indoor room is best.
- Protect the sticker: Keep the sticker flat and dry. Heat can curl the backing paper.
Turntable setup for game vinyl
Before playing your ENA soundtrack, make sure your turntable is level and on a stable surface. Set the tracking force according to your cartridge manufacturer's recommendation, and use the cueing lever to lower the tonearm gently. Keep the stylus clean with a stylus brush. These basics protect both the record and the stylus.
The catalog does not list a recommended tracking force, anti-skate setting, or stylus type for this record. Those settings depend on your turntable and cartridge, so follow the instructions that came with your equipment rather than guessing.
What the catalog does not tell you
The supplied product information does not include the record's weight, pressing plant, or vinyl color. It also does not confirm whether the records come in anti-static inner sleeves. If you need those details, check the package when it arrives or contact Fangamer support. The care steps above work for any standard vinyl record, but always follow any printed instructions included with your copy.


